ROCPLY F17 Formply has a cross-laminated construction

https://www.rocplex.com/formply-f22-1800-x-1200-x-17mm-formwork-plywood-as-6669-certified-product/

ROCPLY F17 Formply is a high-quality plywood produced with FSC certified hardwood timber veneers. These are glued with phenol formaldehyde resin and overlaid with a hard durable resin impregnated paper to give concrete a smooth finish. With a durable A-Type Marine bond, ROCPLY F17 Formply can withstand the rigours of construction moisture. Its hard phenolic surface and high-quality outer veneers make it durable and reusable.
ROCPLY F17 Formply has a cross-laminated construction and is less likely to expand or contract when exposed to rain and temperature changes, making it easier to lay forms for large decks
Can be used on steel or timber form frame systems
Suits a range of frame spacings, concrete slab thicknesses and surface tolerances

ROCPLY ™ F17 Formply is a high quality plywood panel developed and engineered predominantly from graded eucalyptus veneers to the Australian Formwork plywood standard AS6669 as well as to the Australian and New Zealand standard AS/NZS2269- Structural Plywood. Glued with phenol formaldehyde resin and overlaid with a hard durable waterproof resin impregnated paper to give concrete a smooth finish.

The glue is Marine A-BOND , Super E0. ROCPLY ™ F17 Formply can withstand the rigours of construction and moisture and still provide a signifi cant number of re-uses. ROCPLY ™ F17 Formply is manufactured and structurally characterised specifi cally for use in formwork to the requirements of AS 6669-2007.

Adhesive:Marine A-BOND – Super E0 (AS/NZS2098 and AS2754)
Bond Edge Seal:Edges are sealed with 3 layers acrylic latex paint (water based)
Stress Grade:F17 (applies in both directions parallel and perpendicular to the face grain)
Length Width Thickness Squareness ±2mm
Length ±1mm
Width ±1mm
Thickness ±3%
Squareness ±2mm
Finish Class 2 off -form fi nish (AS3610 subject to conditions)


Post time: Sep-30-2021